MATERIALS

  • Good Quality Brush
  • or Paint Sprayer
  • Pearl Polyurethane
  • Stain Applicator

FLOOR DIRECTIONS

1. PREP:
  • Remove all dust from wood's surface.
  • Stir polyurethane, do not shake.
  • Remove excess fibers from stain applicator with painter's tape before using. ​
2. APPLY:
  • Apply polyurethane with high-quality brush.
  • Using smooth, long strokes, apply the polyurethane starting at the edge of the room, with the natural-bristle brush, in the farthest corner from the door. 
  • Maintain a wet edge and move slowly and deliberately so as to not create bubbles in the polyurethane.
  • Use the stain applicator as you move towards the center of the room.
  • With each pass, overlap your strokes slightly to feather the starts and stops together for a more uniform coat. A heavy coat of varnish will look blue when first applied, but don't worry, it dries clear. 
3. REAPPLY & DRY:
  • ​Apply up to 3 coats of polyurethane, for superior protection.
  • Allow product to dry less than 4 hours or greater than 24 hours between coats.​
Clean with soap and water.

SPRAY DIRECTIONS

1. PREP:
  • Remove all dust from wood's surface.
  • Stir polyurethane, do not shake.​
2. APPLY:
  • Dilute polyurethane with water 10-15%. See the photo for consistency.
  • Then apply a moderate coat of polyurethane. A heavy coat of varnish will look blue when first applied, but don't worry, it dries clear. 
3. REAPPLY & DRY:
  • ​Apply up to 3 coats of polyurethane, for superior protection.
  • Allow product to dry less than 4 hours or greater than 24 hours between coats.​
Clean with soap and water.

BRUSH DIRECTIONS

1. PREP:
  • Remove all dust from wood's surface.
  • Stir polyurethane, do not shake.​
2. APPLY:
  • Apply polyurethane with high quality brush.
  • Apply in smooth, long strokes.
  • A heavy coat of varnish will look blue when first applied, but don't worry, it dries clear. 
3. REAPPLY & DRY:​
  • Apply up to 3 coats of polyurethane, for superior protection.
  • Allow product to dry less than 4 hours or greater than 24 hours between coats.​​​
​Clean with soap and water.