RECLAIM STAINS are unlike anything else on the market! They are the easiest way to achieve a reclaimed wood look. Then apply the RECLAIM STAIN to your wood and watch the magic happen. 

SUPERIOR COLORS!
PEARL RECLAIM STAINS will not "stain" the wood, but will actually age it through a ground-breaking oxidation techniques. You're not staining wood to look old, you're actually creating Reclaimed Wood using the same processes as the sun!

Rather than using pigments and colorants to color the top of wood, you will actually turn the wood itself your desired hue! PEARL ACTIVE STAINS do this by interacting with the tannins inside wood, to create your desired color. 

BECOME THE ARTIST
Use with our Wood Oil topcoats, to create unique, layered colors, allowing your inner artist to shine. Pearl stains and pretreaters are compatible for use with other hardwax oils and UV oils on the market. 

EASIER APPLICATION!
Simply apply them to raw wood and watch the magic happen! No wiping stains off stains after applying! no need to deactivate with water like you do with other active stains! Think of the time saved! You can get onto your next project faster, which means more $$ for you!

TOPCOAT to LOCK THE LOOK IN!
The best news, you can absolutely seal the wood, as long as you use PEARL TOPCOATS, and never worry about the stained wood changing color. We have a large variety of topcoats for any wood project. 

  • Water-Based
  • VOC Free
  • Easy Application
  • Topcoat with Pearl Topcoats
  • Coverage: Quart ~ 100 sq. ft.   |   Gallon ~ 400 sq. ft.   |    5 Gallon ~ 2000 sq. ft.

The products are easy to use, simply select the RECLAIM STAIN for your wood type.
​If you're using OAK, select "RECLAIM OAK."

RECLAIM OAK

For a light weathered look on all species of oak, apply 1 coat.
​To deepen the gray, apply a 2nd or 3rd coat.

RECLAIM ALDER

Use for a consistent weathered gray on knotty and clear alder.
​1 coat is usually sufficient. 

RECLAIM CEDAR

Use for a consistent weathered gray on cedar. 1 coat is usually sufficient. 
​For use on any cedar: yellow, red, clear, rough, smooth, aromatic, etc.

RECLAIM DOUG FIR

Use for a consistent weathered gray on douglas fir. Works on flat and vertical grain wood. 1 coat is usually sufficient. 

RECLAIM REDWOOD

Use for a consistent weathered gray on redwood. Make sure wood is sanded first. 1-2 coats depending on look desired. 

RECLAIM PINE

For a light weathered look on pine, apply 1 coat. For use on any type of pine.
​To deepen the gray, apply a 2nd coat.

RECLAIM MAPLE

Use for a consistent weathered gray on HARD MAPLE.
*Soft maple for heart maple may turn lavender. For Soft Maple, chose Reclaim Stain for Oak or Cedar instead. 1 coat is usually sufficient. 

RECLAIM CHERRY

Use for a consistent weathered gray on cherry. Sapwood will remain light.
​1 coat is usually sufficient. 

RECLAIM BEECH

Use for a consistent weathered gray on beech.
​1-2 coats recommended depending on desired look.

RECLAIM POPLAR

For a weathered brown/gray color on poplar, apply 1 coat.
​To deepen the gray, apply a 2nd coat. Very pretty with White Wood Oil.

RECLAIM BIRCH

Use for a consistent weathered gray on birch. 
​1 coat is usually sufficient.